ONEZIM at Print2Pack Egypt 2026: Live Post-Press Equipment Demonstrations in Cairo

ONEZIM will exhibit at Print2Pack Egypt 2026 from 15 to 17 September at the Egypt International Exhibition Center in Cairo. Visitors can meet the team in Hall 2, Booth A2 and see scheduled demonstrations focused on high-speed flute laminating and full-servo window patching. ONEZIM is an overseas packaging machinery brand backed by FENGCHI’s manufacturing and engineering capabilities.

ONEZIM and FENGCHI exhibition invitation for Print2Pack Egypt 2026. Original artwork retained.

What Visitors Can See at the ONEZIM Booth

The booth will focus on two post-press processes used by corrugated packaging and folding-carton manufacturers: bonding a printed top sheet to corrugated board, and applying transparent film to a die-cut window in a carton blank.
Rather than relying only on catalogue descriptions, visitors can examine the feeding, registration, adhesive application, material transfer and collection stages during the scheduled booth demonstrations. The technical discussion can then be based on the buyer’s own materials, dimensions, production targets and current manufacturing problems.

High-Speed Flute Laminator

A flute laminator bonds a printed top sheet to corrugated board. It is used to produce litho-laminated sheets for corrugated packaging and is not a plastic film laminating machine.

During the exhibition demonstration, visitors can focus on the actual production sequence rather than a list of general marketing claims. Useful points to observe include:

• feeding of the printed top sheet and corrugated bottom sheet;
• alignment between the printed image and corrugated board;
• adhesive application and bonding consistency;
• sheet transfer through the laminating section;
• collection and stacking after lamination;
• operator setup and the adjustments required for a new job.

The demonstration is relevant to corrugated box manufacturers, litho-laminated packaging producers and factories evaluating an upgrade to an existing sheet-to-sheet laminating process. Buyers should bring information about the printed top sheet, corrugated board, flute type, maximum and minimum sheet sizes, current output and the defects or bottlenecks they want to solve.

Full-Servo Window Patching Machine

A window patching machine applies transparent film to a pre-cut window in a carton blank. Depending on the selected model and configuration, the process can be used for flat windows, tissue-box openings, creased film and V-cut applications.

During the booth demonstration, visitors can discuss and inspect:

• carton blank feeding and transport;
• film feeding, cutting and positioning;
• adhesive application around the die-cut window;
• film placement and registration at production speed;
• job setup for different window shapes;
• collection after the patching process.

PET, PVC and OPP are commonly used as transparent window films, but the correct material and machine configuration depend on the carton structure, window shape, film thickness, adhesive behavior and production requirements. Visitors are encouraged to bring sample cartons, drawings or material details so that the discussion can be matched to a real application.

What to Prepare Before Visiting

A useful equipment discussion requires more than the general name of a machine. Visitors planning to discuss a specific project should prepare the following information:

• the machine or post-press process being evaluated;
• material type, paper weight, board thickness or flute type;
• maximum and minimum sheet or carton dimensions;
• window shape and film material, where applicable;
• current output and target production capacity;
• common defects, production delays or labor-intensive steps;
• sample photographs, technical drawings or physical samples;
• current equipment and the reason for considering an upgrade.

This information helps the technical team determine which model and configuration should be evaluated. It also reduces the risk of preparing a quotation based only on a broad product name that does not reflect the buyer’s actual materials or production conditions.

Who Should Visit the Booth?

The ONEZIM booth is intended for industrial buyers and channel partners involved in packaging production, including:

• packaging factory owners;
• corrugated box manufacturers;
• folding-carton manufacturers;
• production managers and technical directors;
• equipment purchasing managers;
• packaging machinery distributors;
• agents and local service partners;
• factories upgrading an existing post-press production line.

ONEZIM supplies packaging machinery and equipment solutions. It does not manufacture or sell finished cartons, food boxes, cosmetic boxes, shipping boxes or other custom packaging products.

Event Information

For the organizer’s latest visitor information, see the official Print2Pack Egypt website.

Meet ONEZIM in Cairo

Visitors who plan to discuss a specific machine project can send their material type, sheet size, required process, target output and sample drawings before the exhibition. This allows the ONEZIM team to prepare a more relevant discussion around the buyer’s actual production conditions.
Review the current ONEZIM exhibition schedule or contact the ONEZIM team to arrange a discussion before the event.
ONEZIM is an overseas packaging machinery brand backed by FENGCHI’s manufacturing and engineering capabilities.